All Prior Art

A miniature, unmanned aircraft for acquiring digitized data, transmitting digitized data, or both, having an electrical supply system capable of sustained operation. The extrusion resistant ring in combination with an elastomeric diaphragm provides a high pressure seal for down-hole oil drilling apparatus. The selectively removable frame can adapt to conform to at least one of the width or height of the land vehicle, and can be secured thereto by a securement assembly. It is therefore possible to suppress chatter vibration during machining and is possible to reduce roughness of a cut surface of a work material. The two non-overlapping pulses are a single pair of clock pulses which facilitate AC self-test timing analysis of the logic system. Sensing is performed on signals in the group and adjacent signals are either switched or delayed if the adjacent signals are switching at the same time.

A seat cushion includes a cushioned bottom portion and a back portion. The sonobuoy receives acoustic information from hydrophones and transmits this information to the aircraft, via beams having a predetermined frequency spectrum. A secondary-side second sheet-metal shaped part is mounted rotatably about the axis of rotation in relation to the primary-side first sheet-metal shaped part. For outgoing data packets received from the endpoint, the relay reprocesses the outgoing packets based upon the error correction scheme, such as to remove redundant packets before transmitting them to the network over the wire.

A method of forming a low-defect, substantially relaxed SiGe-on-insulator substrate material is provided. A first comparison output signal is generated which exhibits a voltage transition when the output signal reaches the first reference voltage, and a second comparison output signal is generated which exhibits a voltage transition when the output signal reaches the second reference voltage. The electrodes are spaced along a length of the distal section and may be interspersed with at least one temperature sensor located between electrodes.

An application for transmission of a three-dimensional eyewear synchronization signal to synchronize the operation of shutters of three-dimensional eyewear uses an industry standard wireless transmission technique. The system provides call control, signaling, andor delivery of voice, video, and other media in substantially real time. A second antenna element includes a feeder line extending from a second converter aligned together with the first converter and a plurality of radiating elements.

A performance testing apparatus for a heat pipe includes an immovable portion having a heating member located therein for heating an evaporating section of the heat pipe, and a movable portion capable of moving relative to the immovable portion. The users account information is set up and saved securely. A stand is integrally formed with a bottom of the plate to position a front edge of the plate higher in elevation than a back edge of the plate.

A process for treating an effluent gas stream arising from a manufacturing operation that produces an olefin or an olefin derivative. A curve representing actual acceleration-speed, corresponding to time-speed transition to be planned, approaches a restricted acceleration curve. The portal grippers are configured for transferring the parts to be processed between the processing stations and the buffers and for loading and unloading of parts.

A positioning system, device, and method are provided to facilitate the in-flight positioning of two aircraft relative to one another such that a second aircraft is guided to an in-flight refueling position relative to a first aircraft. The male and female motors are provided within the compressor main body. An overhead stream from a first distillation column is decanted into two liquid phases. To fabricate a first set of microlenses, a first set of microlens material is patterned onto a support, reflowed under first reflow conditions, and cured. Because a cross section of said shaft is different from the cross section of the hole in the battery compartment, the shaft is connected to the hole in the battery compartment only at a number of points. Additionally, the watercraft can include a handlebar cover that is configured to prevent water from entering a steering mechanism.

A high-intensity light comprising a side-emitting optoelectronic device adapted to emit light of a desired color. The microencapsulated beads are attached and embedded in the compressed cloth. It compares the temperature of a given physical storage device to a temperature threshold value of this physical storage device or compares it to an affected temperature thereof due to the variable factor generation sources, thereby moving, for data transfer, an operation position of physical storage device based on a comparison result at such time.

A discreet removable chronological group indicator tab placed on a product at a predetermined depletion level. , a cosmetic kerosene fraction having a boiling range of between 180 and 275\xb0 C. A cover of the wiring installation device is configured to cover the hole provided in the wall. The tag addition unit detects a group of series messages which have a mutual association and are consecutive in time sequence among the messages analyzed and to add a tag for identifying each group of messages to a detected group of messages. The configuration of the rotating rod permits for selection between a contact actuation mode wherein movement of the contact safety initiates securing of a fastener and a sequential actuation mode in which the trigger assembly is manipulated by a user to trigger securing of a fastener after the contact safety has be depressed towards the driver housing.

An annular body, and method of making same, comprising at least one wear surface portion, the portion comprising a plurality of layers held in a matrix, each layer consisting essentially of fibres which extend generally in one direction and parallel to each other and from the centre of the body to the periphery, whereby the wear of that surface portion is improved. The network can be optical or constructed with RF microwave links. Additionally, the metadata may be formatted using an eXtensible Markup Language. This system and method is particularly suited for use in a vehicle having a rear window which is pivotable between an open position and a closed position and where a rear window wiper is desired or required. The device includes an apparatus for reading the payment particulars, a central processing unit to which the reading apparatus is connected, a modem for establishing a telephone link with the server center, and an apparatus for dialing telephone numbers such that the dialing apparatus is associated with the modem. Based on medical conditions claimed by a claimant, medical evidence queries are automatically generated to provide instructions to medical providers for conducting physical exams and laboratory tests and for retrieving medical records.